Electronic systems-The power control/measurement
Electronic Systems offers high-quality systems, essential for the safe and efficient managementof the entire production process in the rubber and plastic industry.
Electronic Systems has become a world leader in the area of production cycle measurement, control and automation.
Electronic SYSTEMS has a large range of measurement systems with different type of sensors like I.R. Beta and X-rays, Laser, Air pressure etc. according to the various application and full Customers satisfaction.
C-Swan
ε-SINT is a reflection gauge engineered for thickness measurement.
The gauge bases its functioning on capacitive technology, it found its mayor application in bubble or double bubble plants, installed in a way to measure directly on the bubble.
MAIN FEATURES
Suitable for thickness measure on the bubble in blown film installations
Gauge both versions contact or contactless
Tracking arm to follow the bubble swing
Category: Sensors.
Controls & Iguard
The set of measurements is automatically organized and represented by diagrams and numbers. All graphic processing has be created to be immediately analyzed thanks to specific symbols and colours. Moreover, specific buttons on the touch screen allow fast browsing through data areas. Authorized users are always able to intervene and set a customised configuration, change scale and unit of measurement, display details with cursor, zooms and tracking systems.
MAIN FEATURES
Universal configuration for all Electronic Systems control and measuring systems
User interface developed in Windows® environment
Great data management capacity
Easy coordination of data management areas
Easy and fast consultation with symbols and colours
Category: Cabinets.
Tags: Adhesive tapes, Biax extrusion, Blown film, Cast film, Coating & laminating, Composites, Extrusion coating, Nonwovens, Paper, PVC calendering, Rubber, Sheets & foils.
Essair™ Duplex
ESSAIR™ DUPLEX is a measurement technology, patented by Electronic Systems, ideal for direct thickness measurement without contact.
MAIN FEATURES
It does not make use of any type of radioactive sources.
Direct thickness measurement expressed in micron or mm.
No contact with the material.
Automatic calibration system.
Category: Sensors.
Tags: Composites, PVC calendering, Rubber, Sheets & foils.
Essair™ Reflex
ESSAIR™ REFLEX is a measurement technology, patented by Electronic Systems, ideal for direct thickness measurement without contact.
MAIN FEATURES
It does not make use of any type of radioactive sources
Direct thickness measurement expressed in micron or mm
No contact with the material
Automatic calibration system
Category: Sensors.
Tags: Coating & laminating, Composites, Paper, PVC calendering, Sheets & foils.
Hiscan
HISCAN can easily be integrated with existing structure without any major modification.
HISCAN automatic scanner can be equipped with the following measurement sensors included in the range of Electronic Systems products:
• ISOSINT K
• ISOSINT H
• PREXISION
• DIGILAYER
MAIN FEATURES
Light supporting structure with stainless steel beams
Protection covers easy to remove during the mechanical maintenance
Sensor sliding system with high mechanical and long lasting stability
Easy to assemble: adjustable inclination
Category: Scanners.
Tags: Adhesive tapes, Biax extrusion, Blown film, Cast film, Coating & laminating, Composites, Extrusion coating, Nonwovens, Paper, PVC calendering, Rubber, Sheets & foils.
HISCAN is an automatic scanning “O” frame unit to measure in transmission mode.
HISCAN is an automatic scanner with a smaller footprint and optimal mechanical configuration. For this reason it was specifically developed for a large range of industrial applications and production lines. The HIGHSCAN “O” frame is composed of two solid IPE beams, fastened to the stainless steel terminals. The solid sliding carriage device, which can house up to two sensors, is driven by linear guides with limited support elements and sliding sleeves. The scanning speed is adjustable and the sensor is positioned to ensure high accuracy.
I.R. / Digilayer RFX
The IR measurement sensor of the DIGILAYER series measure on line and without contact the thickness of the barrier layers present inside multi-layer films.
MAIN FEATURES
Ideal for the measurement of clear stretch film.
Designed for installation in industrial environments
also characterized by the presence of dust, fumes, etc.
Category: Sensors.
Tag: Cast film.
Infrared radiations are the measurement method employed to determine the thickness of the materials like PP, PE, LDPE, etc.
The module of measurement, composed by an emitter and a receiver, is installed on a standard I-bean scanner. The sensor management and the profiles display on the operator console of the measurement system is completely integrated with that of the total measurement. The sensor can be personalised depending on specific needs required by the application:
Edges detector of the film
Automatic correction of the profile of total thickness.
I.R. / Digilayer TRX
The IR measurement sensor of the DIGILAYER series measure on line and without contact the thickness of the barrier layers present inside multi-layer films
MAIN FEATURES
Ideal for the simultaneous measurement of more barrier layers in laminated and/or multi-layer materials.
Designed for installation in industrial environments where there may be dust, fumes, etc.
Category: Sensors.
Tags: Biax extrusion, Blown film, Cast film, Sheets & foils.
Infrared radiations are the measurement method employed to determine the thickness of the materials usually used as a barrier, for example EVOH and PA. The module of measurement, composed by an emitter and a receiver, is installed on a standard scanner for the measurement in transmission mode, individually or matching other devices, for example ß or X sensors, in order to make a transversal reading of a barrier layer simultaneous to the one of total weight/thickness. The sensor management and the profiles display on the operator console of the measurement system is completely integrated with that of the total measurement. The sensor can be personalised depending on specific needs required by the application:
• Edges detector of encapsulated films (beginning of barrier layer)
• Automatic correction of the profile of total thickness (detected by X or ß ray sensors, depending on the specific weight of each layer), in case of no uniform
DIGILAYER sensor can be assembled on board of any scanning device that works for transmission between the ones included in the range of Electronic Systems products:
• SLIM DUPLEX
• HISCAN
• TWIN™ SCANNING
Isosint K/H
IISOSINT K and H are the most popular and effective method for the control of materials made of sheets or foils.
MAIN FEATURES
High protection container, solid and compact, for any type of industrial application, even in dangerous environments.
High accuracy standards,reliable and simple to use.
Equipped with microprocessor: measurement treatment and conversion and support during data transmission through Profibus.
Category: Sensors.
Tags: Adhesive tapes, Biax extrusion, Blown film, Cast film, Coating & laminating, Composites, Extrusion coating, Nonwovens, Paper, PVC calendering, Rubber, Sheets & foils.
ISOSINT series measurement sensors comply fully with all the requirements and regulations for both operators and environmental safety. Therefore, with the comprehensive knowledge and experience of Electronic Systems in planning and using devices which contain radioactive sources, it is totally safe. The structure of the container, the quality of nuclides, the radiation shielding and geometry, limited by oblurators, and all other details have been carefully assessed to ensure the highest level of operational safety.
The sensor can be personalised depending on specific needs required by the application:
•Edges detector
•Modification of the Gap through material passage and measurement Spot
• Temperature probes for air compensation
ISOSINT K and H sensor can be assembled on board of any scanning device that works for transmission between the ones included in the range of Electronic Systems products:
• SLIM DUPLEX
• HISCAN
• TWIN™ SCANNING
• TWIN™ BIAX
Laser Swan RFX
SWAN LASER is a reflection gauge engineered for direct thickness measurement.
The gauge uses a combined technology lASER-InDucTIVE with a patented auto calibration method.
MAIN FEATURES
Automatic reference roll tracking system
Extremely durable and mechanically stable sensor shift system
Probe suitable to be pressurized to keep the LASER optics cleaned
in heavy industrial environment
Protection against accidental contact with the material being measured
Simple and compact structure with high shock resistance
Suitable for measuring wide product in an extremely wide thickness range.
SWAN LASER is installed on scanners equipped with reference roll for measurement in reflection mode, where the same roll represents the zero reference to determine the measurement values. Is used for flexible materials guaranteeing a good adherence to the reference roll. Depending of the application, a security system to detect lumps and/or extra thickness (lump-detector), external to the measurement system could be used.
Reflex
REFLEX is an automatic scanning unit with “O frame” mechanical structure to measure in reflection mode.
A reference-roll, on which the material is leaning, is part of the structure.
MAIN FEATURES
Easy and compact structure with high resistance to mechanical vibrating stress.
Protection covers easy to remove during the
mechanical maintenance.
Sensor sliding system with high mechanical and long lasting stability.
Rectified and balanced measurement roll, equipped with low friction bearings.
Easy to assemble: adjustable inclination.
REFLEX is a scanner designed to stand extreme working conditions; thanks to the easy and compact stainless steel structure it is reliable and efficient. During the scanning phase, the sensor is driven by linear guides with relative supporting elements and sliding sleeves.
The scanning speed is adjustable and the sensor is positioned with high accuracy.
Category: Scanners.
Tags: Coating & laminating, Composites, Paper, PVC calendering, Rubber, Sheets & foils.
REFLEX can be easily integrated on existing
structures without any substantial modification.
Moreover in case of particular requirements
(for example, low material tensions or minimum winding angle) the reference roll can be motorized or synchronized with the production line speed.
REFLEX automatic scanner can be equipped with the following measurement sensors included in the range of Electronic Systems products:
• ESSAIR™ REFLEX.
No comments:
Post a Comment